CLOSE
  • Flooring System
  • Construction Demolition and Recycling
  • Roofing and Siding Systems
  • Doors and windows
  • HVAC
  • Steel Building APAC
  • Kitchen and Bath Europe
  • Construction Interiors
  • Construction Demolition and Recycling Europe
  • Construction MENA
  • Architectural Glass
  • Modular and Prefab Construction
  • Construction Engineering Services
  • Safety and Compliance Europe
  • Wall Systems
  • Waterproofing APAC
  • Forensic and Owners Representative
  • Startups APAC
  • Architectural Glass APAC
  • Roofing and Siding Systems Europe
  • Marine Construction
  • Mechanical Electrical and Plumbing
  • Construction Bidding and Auctions
  • Architecture and Design Services
  • Concretes, Aggregates and Materials
  • Safety and Compliance APAC
  • Construction Demolition and Recycling APAC
  • Steel Building Europe
  • Construction Consulting
  • Roofing Systems APAC
  • Workforce Management and Staffing
  • Construction Latam
  • Landscaping
  • Construction Marketing
  • Modular Construction APAC
  • Modular Construction Canada
  • Construction Engineering MENA
  • Swimming Pool Construction
  • Surveying Canada
  • Construction Engineering Canada
  • Specialty Construction
  • Commercial Contractors
  • Scaffolding Contractors
  • Building Restoration and Maintenance
  • Doors and Windows Canada
  • Sustainable Construction APAC
  • Construction Law
  • Architectural Glass Canada
  • Building Information Modeling APAC
  • Construction Staffing
  • Insulation, Coating and Waterproofing
  • Cold Storage Construction Canada
  • Construction Management Canada
  • Swimming Pool Construction Canada
  • Scaffolding Canada
  • Flooring System APAC
  • Pre-Construction Services
  • Construction Staffing Europe
  • Precast Concrete Europe
  • Cold Storage Construction APAC
  • Apartment and Condominium Contractors Canada
  • MEP Canada
  • Foundation Construction Canada
  • Outdoor Construction
  • Construction Law APAC
  • Construction Saudi Arabia
  • MEP APAC
  • Decking Canada
  • Kitchen and Bath
  • Building Sealing Solutions Europe
  • Swimming Pool Construction APAC
  • Mould Remediation and Testing Europe
  • Mechanical Contractor Canada
  • Construction Consulting Europe
  • Construction Coating Europe
  • Landscaping Canada
  • Construction Management
  • Construction Management APAC
  • Flooring Systems Europe
  • Dummy
  • Commercial Contractors APAC
  • Commercial Contractors Europe
  • Concretes, Aggregates and Materials Europe
  • Concretes, Aggregates and Construction Materials APAC
  • Construction Cladding APAC
  • Concrete Canada
  • Residential Construction
  • Building Restoration and Maintenance Canada
  • Construction Interiors Europe
  • Modular and Prefab Construction Europe
  • Buinding Restoration and Maintenance Europe
  • Construction Forensic and Owners Representative Europe
  • Professional Services
  • Structures
  • Systems
  • Roofing and Siding Systems Canada
  • Professional Services Canada
  • Structures Canada
  • Systems Canada
  • Professional Services Europe
  • Structures Europe
  • Systems Europe
  • Training Services
  • Geotechnical Services Canada
  • Foundation Construction
  • Abatement Services
  • Screen Services
  • Architectural Fabrication Services
  • Construction Equipment
  • Exterior Construction
Skip to: Curated Story Group 1
Construction Business Review
US
EUROPE
APAC
CANADA
MENA
LATAM
AUSTRALIA
About Us Conference Partner With Us
  • US
    • US
    • EUROPE
    • CANADA
    • AUSTRALIA
  • Professional Services
    Abatement Services
    Architecture and Design Services
    Building Restoration and Maintenance
    Construction Bidding and Auctions
    Construction Consulting
    Construction Engineering Services
    Construction Equipment
    Construction Law
    Construction Management
    Construction Marketing
    Construction Staffing
    Forensic and Owners Representative
    Pre-Construction Services
    Scaffolding Contractors
    Training Services
  • Structures
    Commercial Contractors
    Construction Demolition and Recycling
    Construction Interiors
    Exterior Construction
    Foundation Construction
    HVAC
    Landscaping
    Marine Construction
    Mechanical Electrical and Plumbing
    Modular and Prefab Construction
    Outdoor Construction
    Residential Construction
    Specialty Construction
    Swimming Pool Construction
  • Systems
    Architectural Fabrication Services
    Architectural Glass
    Concretes, Aggregates and Materials
    Doors and windows
    Flooring System
    Insulation, Coating and Waterproofing
    Kitchen and Bath
    Roofing and Siding Systems
    Screen Services
    Wall Systems
  • Leadership Perspectives
  • Insights
  • Research
  • News
  • Magazines
  • CXO Awards

Thank you for Subscribing to Construction Business Review Weekly Brief

A featured contribution from Leadership Perspectives: a curated forum reserved for leaders nominated by our subscribers and vetted by the Construction Business Review Advisory Board.

Union Concrete And Construction Corp

Jeff Jackson, CSP, Director, EHS & Risk Management

Electrical Safety Beyond Compliance

Jeff Jackson

Jeff Jackson

Electrical Safety Champion

Jeff Jackson, CSP, OSHA 500, is a safety professional with extensive experience in construction, utility, and industrial operations. He specializes in safety management systems, regulatory compliance, risk reduction, and workforce training. His work focuses on helping organizations improve safety performance while supporting operational efficiency and long-term business objectives.


Planning, Training and Inspection Before Work Begins


Electrical hazards remain one of the most serious risks in construction and industrial work. While falls, struck-by incidents, and caught-between hazards often receive the most attention, electrical incidents continue to cause severe injuries, fatalities, equipment damage, and project delays. Throughout my career in heavy construction, I have found that the most effective electrical safety programs focus on planning, awareness, and accountability rather than simply meeting regulatory requirements.


Most companies have written procedures, lockout/tagout programs, and personal protective equipment requirements. Those elements are important, but they do not prevent incidents by themselves. The organizations that consistently perform well are the ones that actively identify and control electrical hazards before work begins.


“Safe work practices still depend on workers recognizing hazards and supervisors maintaining oversight.”


Many electrical incidents can be traced back to inadequate planning. Crews often work around underground utilities, temporary power systems, generators, extension cords, and overhead power lines. When those hazards are not addressed during pre-task planning, workers are placed at unnecessary risk. A thorough job hazard analysis should identify electrical exposures, establish safe work practices, and clearly communicate responsibilities before the first piece of equipment arrives on site.


Training is another critical component. Workers generally understand that direct contact with electricity is dangerous. What they often underestimate are the indirect exposures that exist during normal operations. A laborer carrying material, an operator moving equipment, or a mechanic using damaged electrical tools may not recognize the hazards around them. Effective training uses real-world examples and site-specific situations that workers are likely to encounter.


Regular inspections and preventive maintenance are equally important. Damaged cords, missing ground pins, overloaded circuits, and deteriorating temporary power systems are common findings on many jobsites. These conditions rarely develop overnight. Most are visible long before they result in an injury or equipment failure. Consistent inspections and prompt corrective action help eliminate problems before they become incidents.


Breaking the Chain Before an Incident Occurs


Technology has also improved electrical safety in recent years. Ground fault protection, utility locating equipment, digital inspection systems, and electronic tracking tools provide additional safeguards. These tools can be valuable, but they should support good decision-making rather than replace it. Safe work practices still depend on workers recognizing hazards and supervisors maintaining oversight.


One lesson that continues to stand out during incident investigations is that serious electrical events are rarely caused by a single failure. More often, they result from a series of missed opportunities. A hazard was not identified. A procedure was not followed. A damaged piece of equipment was not removed from service. A concern was observed but never reported. Breaking any one of those links could have prevented the incident.


Electrical safety is ultimately about protecting people. Compliance provides a framework, but strong safety performance comes from a culture that values preparation, communication, and accountability. When workers understand the hazards they face and are empowered to address them, the likelihood of serious incidents decreases significantly.


The goal should not be to simply comply with regulations. The goal should be to ensure that every employee goes home safely at the end of the day.


The articles from these contributors are based on their personal expertise and viewpoints, and do not necessarily reflect the opinions of their employers or affiliated organizations.

Editorial Lens

Electrical hazards remain a critical concern for construction professionals, making proactive risk management essential to protecting workers and maintaining safe project environments. For safety directors, contractors and site supervisors, strengthening hazard awareness, preventive inspections and workforce accountability can help establish safer working conditions while reducing preventable incidents and operational disruptions.

The Leadership Perspectives forum brings together voices shaping the construction industry. Participation is by invitation only. It features leaders who are not merely observing industry changes, but actively contributing to them through operational expertise and project execution insights.
EDITOR'S CHOICE
  • Willis Towers Watson

    Cushman & Wakefield [NYSE: CWK]

    Projects Today Come Down to Nerves of Steel and Realistic Expectations

    Jason D’Orlando, Senior Managing Director, and Michael Morehead, Senior Director, Project and Development Services - Industrial

  • Willis Towers Watson

    Walmart [NYSE: WMT]

    Navgating the Challenges and Innovations in Mega Construction Projects: Building Competent Leadership and Embracing Technological Trends

    Seth Roy, Senior Director - Design & Construction, Walmart [NYSE: WMT]

  • Willis Towers Watson

    Meritage Homes [NYSE: MTH]

    Act Now to Address Aging Workforce

    Poli Peters, VP of Operations

  • Willis Towers Watson

    Advanced Drainage Systems [NYSE: WMS]

    Walking the sustainability walk: The case for EPR

    Brian King, EVP Marketing, Product Management and Sustainability, Advanced Drainage Systems, Inc. [NYSE: WMS]

Construction Business Review
Follow on LinkedIn

About

  • Home
  • About Us
  • Partner With Us

Stay Connected

  • Subscribe
  • Newsletter
  • Sitemap

Contact Us

  • editor@constructionbusinessreview.com
  • sales@constructionbusinessreview.com
  • marketing@constructionbusinessreview.com

Legal

  • Editorial Policy
  • Privacy Policy
  • Terms of Use

© 2026 Construction Business Review. All rights reserved.

This content is copyright protected

However, if you would like to share the information in this article, you may use the link below:

https://flooring-system.constructionbusinessreview.com/cxoinsight/electrical-safety-beyond-compliance-nwid-2688.html

We use cookies on this website to enhance your user experience. By clicking any link on this page you are giving your consent for us to set cookies. More info

I agree